Table of Contents
Advertisement
Attach a separate
safety chain around the
outboard end of each
lower control arm.
Engine Overheating
You will find a coolant temperature gage on your
Aurora's instrument panel. Your information center will
also display messages about engine overheating. See
"Coolant Temperature Gage" in the Index.
Overheated Engine Protection
Operating Mode
Should a low coolant condition exist and the message
HOT STOP ENGINE is displayed, an overheat
protection mode which alternates firing groups of four
cylinders helps prevent engine damage. In this mode,
you will notice a loss in power and engine performance.
This operating mode allows your vehicle to be driven to
a safe place in an emergency; you may drive up to
50 miles (80
km).
Towing a trailer in the overheat
protection mode should be avoided.
I
NOTICE:
~
After driving in the overheated engine protection
operating mode, to avoid engine damage, allow
the engine to cool before attempting any repair.
The engine oil will be severely degraded. Repair
the cause of coolant loss, change the oil and reset
the oil life indicator. See "Engine Oil, When to
Change" in the Index.
5-14
Advertisement
Table of Contents
