Oldsmobile 1997 Aurora Owner's Manual page 288

3.
I I
I I
Unclip the bulb
assembly from the
wiring harness
and replace the
bulb assembly.
4. Reverse Steps 1 through 4 to replace the bulb
assembly, headlamp housing, air cleaner cover
and tube.
5. Replace the headlamp assembly by aligning the pin
and tightening the two bolts to secure it.
High-Beam Headlamp Bulbs
If
you need to replace a headlamp bulb, do the following:
1. Remove the h e a d l a p assembly if you need more
hand clearance.
2. Pull up on the wiring harness. This unlocks the bulb.
-
v-
3. Now you can reach in behind the lamp housing and
4. To replace the bulb, angle the new bulb into the
pull out the bulb.
empty socket.
5. Push the base of the bulb down to lock it into place.
6. If you removed the headlamp assembly, reassemble
it by aligning the pin and tightening the two bolts to
secure it.