• indicated by Nedap. Mounting instructions The NVITE reader can be mounted to any surface, including directly to metal. See the picture below for details about the dimensions. Figure 1: NVITE reader dimensions (mm) Mount the base-plate on the required location.
USB Driver installation Make sure your computer is connected with internet. Connect the NVITE reader to your computer via the USB cable. The USB drivers may be installed automatically. In case you need to install the USB drivers manually, please go to the website www.ftdichip.com/Drivers/VCP.htm...
Operating frequency NFC and smartcards: 13.56 MHz Proximity cards: 120 kHz 120 kHz: Nedap + EM4200 + HID-PROX + AWID-LF 13.56 MHz: ISO14443A, MIFARE DESFIRE (EV1/EV2), MIFARE Classic, MIFARE Supported RFID cards Ultralight (C), MIFARE Plus (SL3), ISO15693, HID iCLASS, LEGIC Advant, LEGIC Prime and Sony Felica.
Page 5
NVITE | quick reference guide B Disclaimer This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no license under any patent or other right, nor does the publisher assume liability for any consequence of its use;...