Table of Contents
Advertisement
Quick Links
User Manual
Set MidRanger + Antenna (9217967)
The MidRanger + Antenna set is the ideal RFID item scanner for your library staff. The shielded
antenna is developed to only read items that are put on top of the antenna, resulting that no
mistakes will be made in reading the wrong items. The design of the product is perfected and aimed
to fit in any environment.
Version: 2.8
published on Monday, January 02, 2017
Advertisement
Table of Contents
Related Manuals for Nedap MidRanger + Antenna Set
Summary of Contents for Nedap MidRanger + Antenna Set
- Page 1 Set MidRanger + Antenna (9217967) The MidRanger + Antenna set is the ideal RFID item scanner for your library staff. The shielded antenna is developed to only read items that are put on top of the antenna, resulting that no mistakes will be made in reading the wrong items.
-
Page 2: Technical Support
The software / hardware described in this document / file is furnished under a license agreement and may be used only in accordance with the terms of agreement. Documentation copyright notice Any technical documentation that is made available by Nedap Library Solutions is the copyrighted work of Nedap Library Solutions and is owned by Nedap Library Solutions. Disclaimer NO WARRANTY. -
Page 3: Table Of Contents
Table of Contents Technical support ....................................2 Table of Contents ....................................3 Safety Precaution ....................................4 IC FCC / IC STATEMENT..................................5 Compliance statements (part15.19) ............................5 Warning (part15.21) ..................................5 Information to the User (Part 15.106(b)) ..........................5 Dimensions ....................................... 6 Content of Box ...................................... -
Page 4: Safety Precaution
Safety Precaution Installation of these products must be performed by a qualified installation partner. Do not use the product in damp places. If you smell smoke or other odors or hear a strange sound, unplug the power cord and contact your dealer. -
Page 5: Ic Fcc / Ic Statement
IC FCC / IC STATEMENT FCC ID: CGDMIDRANGER IC: 1444A-MIDRANGER Compliance statements (part15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 6: Dimensions
Dimensions www.nedaplibrary.com... -
Page 7: Content Of Box
Content of Box When you receive the box, it is strongly advised to check the contents of the box before installation. The box should contain the following components: Antenna 9564918 Reader 9564675 Net adapter 9651802 Documentation This manual RF.Test Lite manual The antenna has a 2 meter RG174 cable with a SMA connector. -
Page 8: Installation Guide
Installation Guide Antenna Because the antenna is shielded, it can be used in a lot of different environments. It can be placed on any desk type, but when it is mounted below a table, the table should be made of a material that doesn’t influence 13.56MHz RFID fields. - Page 9 Below table When looking for a good spot to mount the antenna, make sure the table doesn’t have any metals near the antenna (field). When a good spot is found, you will need 4 fastening screws (corresponding to your table material), and a drill to prepare the table. Tape the template (which you can cut out from the next page) on the surface where you want to place the antenna.
-
Page 10: Reader
Reader The reader itself can also be placed on top of a table, or can be mounted under a table, or against a wall. The reader is mounted using three screws. Always make sure that none of the cables is under any stress when mounting the reader. -
Page 11: First Setup
First setup Before connecting and switching the reader on, make sure to download the drivers and the RF.Test Lite tool on the computer which is going to be used to configure the reader. The drivers and RF.Test Lite can be found on the support site (http://www.nedaplibrary.com/support). Although the reader can be connected to the network via Ethernet, the reader will always need to be set up the first time via USB. -
Page 12: Ip Networking
IP Networking To change the IP-address of the reader, the reader needs to be connected with an RS232 or USB connection to the pc. When a different IP-address is configured the changes are effectively immediate, so when connected over the network, the connection will be lost immediately. 1. -
Page 13: Rfid Modes
5. Here you can find the following settings: RFID IP: IP address of RFID reader b. RFID Subnet: Subnet address of the RFID reader RFID Gateway: Gateway of the reader 6. It is also possible to put the reader in DHCP mode, so it will get an IP-address from a local DHCP server in the network during power-up. -
Page 14: Eas
This tab shows the settings for an EAS or an AFI alarm. Alarm: Check to switch the relais/beeper upon the detection of a tag Alarm Type: Select the type of alarm (note: this type will also be programmed when enabling/disabling the alarm on a tag using the appropriate commands) ... -
Page 15: Iso 15693 / I-Code
ISO 15693 / I-Code... -
Page 16: Monitor
The UID (or ID) field of the packet contains the 64bit truncated version of this EPC number. See the BiblioCheck4 Monitor document. All the settings of the configuration can be found in the RF.Test Lite manual (this manual can also be found on the Nedap library support site). www.nedaplibrary.com... -
Page 17: Operation Of Product
Operation of product Setup Screw the SMA connector from the Antenna tightly on the Reader. Then connect the USB and/or the Ethernet cable to connect it to your laptop or network. The last connector is the power cable, which you use to switch the setup on or off. Switching on/off To switch the reader on, connect the supplied 12V power adapter, and plug it in. -
Page 18: Maintenance
Maintenance Software It is always recommended to update the software versions to the latest version, which can be downloaded from the Nedap Library website: http://www.nedaplibrary.com/support. This should at least be done once a year, during a maintenance check. Cleaning instruction... -
Page 19: Frequently Asked Questions
Frequently Asked Questions Question 1.: Why are there not yet any FAQ’s? Since the product is just released, we do not have any questions which are frequently asked. For any questions please contact the helpdesk at http://www.nedaplibrary.com/support.html. -
Page 20: Discarding
Discarding The product should be discarded as electronic equipment, according to the Waste Electrical and Electronic Equipment Directive (WEEE). www.nedaplibrary.com... -
Page 21: Technical Specifications
Technical Specifications Physical Specifications Article numbers: 9217967 Set MidRanger + Antenna 9564675 (MidRanger) and 9564918 (Antenna) Dimensions (mm): MidRanger: Ca. 140 x 105 x 29 (l x w x h) Antenna: Ca. 348 x 285 x 20 (l x w x h) Material: Stainless Steel, Zinced Steel (Powder coated) and HIPS Weight:... - Page 22 Electrical Specifications Supply voltage: AC: 100V-230V, 50/60HZ Working voltage: DC: 12V Power consumption: Max. 5 Watt Length power cable: 1,5m Environmental Specifications Operating temperature: +0 / +40 C Storage temperature: -10 / +55 C Do not mount under: Metal desk / table www.nedaplibrary.com...
-
Page 23: Eu Declaration Of Conformity
EU Declaration of Conformity... - Page 24 Nedap Library Solutions | www.nedaplibrary.com | info@nedaplibrary.com www.nedaplibrary.com...