Before Starting The Engine; Before Getting In; After Getting In - Mazda 2006 MAZDA6 Owner's Manual

Mazda6_8U66-EA-05F_Edition2 Page128
Tuesday, July 26 2005 11:24 AM
Before Driving Your Mazda

Before Starting the Engine

Before Getting In

Be sure the windows, outside mirrors,
and outside lights are clean.
Inspect inflation pressures and
condition of tires.
Look under the vehicle for any sign of
a leak.
If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. See
Maintenance, Section 8.
4-6
Form No.8U66-EA-05F
Black plate (128,1)

After Getting In

Are all doors closed and locked?
Is the seat adjusted properly?
Are the inside and outside mirrors
adjusted?
Is everyone's seat belt fastened?
Check all gauges.
Check all warning lights when the
ignition switch is turned to the ON
position.
Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly familiar with your
Mazda.