Mazda 2006 MAZDA6 Owner's Manual page 172

Mazda6_8U66-EA-05F_Edition2 Page172
Tuesday, July 26 2005 11:24 AM
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Headlight High-Beam Indicator
Light
This light indicates one of two things:
The high-beam headlights are on.
The turn signal lever is in the flash-to-
pass position.
Shift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position
when the ignition switch is in the ON
position.
Gear position indicator
í
5-38
Some models.
Form No.8U66-EA-05F
Black plate (172,1)
Gear position indicator
When the shift lever is in the D or M
position, the numeral for the selected gear
displays.
í
TCS Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS is
operating, the indicator light flashes.
If the light stays on, the TCS may have a
malfunction and it may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
In addition to the indicator light
flashing, a slight lugging sound will
come from the engine. This indicates
that the TCS is operating properly.
On slippery surfaces, such as fresh
snow, it will be impossible to
achieve high rpm when the TCS is
on.