Mazda 2006 MAZDA6 Owner's Manual page 316

Mazda6_8U66-EA-05F_Edition2 Page316
Tuesday, July 26 2005 11:27 AM
Maintenance and Care
Owner Maintenance
(Sport Wagon)
1. Remove the liftgate upper trim and
high-mount brake light component.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
License plate lights
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens.
8-50
Form No.8U66-EA-05F
Black plate (316,1)
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
Replacing Interior Light Bulbs
Overhead light/Map lights (With
overhead console)
1. Remove the screws.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
3. Turn the socket and bulb assembly
counterclockwise and remove it.