Hummer 2008 H2 Owner's Manual page 431

5. Slide the license plate holder onto the spare or flat
tire. Secure it from the back of the tire carrier with
the wing nut.
If you choose not to reinstall the spare or flat tire on
the vehicle, you will still need to reinstall the
license plate holder on the spare tire carrier.
Storing the Jack and Tools
To store the jack and tools:
1. Lower the jack completely.
2. Place the jack in the mounting bracket.
3. Turn the hole at the top of the jack clockwise until
the jack is held tight in the mounting bracket.
4. Push and pull on the jack and retighten if necessary
to make sure the jack is secure.
5. Place the wheel blocks in the tool bag.
6. Place the remaining tools in the tool bag.
5-95