How To Add Coolant To The Radiator - GMC 2010 Canyon Crew Cab Owner's Manual

Table of Contents

Advertisement

How to Add Coolant to the
Recovery Tank
WARNING:
{
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot enough.
Do not spill coolant on a hot engine.
Notice: This vehicle has a specific coolant fill
procedure. Failure to follow this procedure could
cause the engine to overheat and be severely
damaged.
When the coolant in the coolant recovery tank is at the
FULL COLD mark, start the vehicle.
If coolant is needed, add the proper DEX-COOL
coolant mixture at the coolant recovery tank.
6-32

How to Add Coolant to the Radiator

WARNING:
{
An electric engine cooling fan under the hood can
start up even when the engine is not running and
can cause injury. Keep hands, clothing, and tools
away from any underhood electric fan.
WARNING:
{
Steam and scalding liquids from a hot cooling
system can blow out and burn you badly. They are
under pressure, and if you turn the surge tank
pressure cap — even a little — they can come
®
out at high speed. Never turn the cap when the
cooling system, including the surge tank pressure
cap, is hot. Wait for the cooling system and surge
tank pressure cap to cool if you ever have to turn
the pressure cap.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Canyon - 2010

Table of Contents