Headlamp High/Low-Beam Changer; Flash-To-Pass; Windshield Wipers - GMC 2010 Canyon Crew Cab Owner's Manual

Table of Contents

Advertisement

Turn Signal On Chime
If a turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal and the message TURN SIGNAL will also appear
in the DIC. To turn the chime and message off, move
the turn signal lever to the off position.
See "TURN SIGNAL" under DIC Warnings and
Messages on page 4-37 for more information.

Headlamp High/Low-Beam Changer

2 3
Headlamp High/Low Beam Changer: Push
the turn signal/multifunction lever away from you to turn
the high beams on.
Pull the lever towards you to return to low beams.
This indicator light turns on in the instrument panel
cluster when the high beam headlamps are on.

Flash-to-Pass

This feature lets you use the high-beam headlamps to
signal a driver in front of you that you want to pass.
It works even if the headlamps are in the automatic
position.
To use it, pull the turn signal lever toward you, then
release it.
If the headlamps are in the automatic position or on
low beam, the high-beam headlamps will turn on.
They will stay on as long as the lever is held toward
you. The high-beam indicator on the instrument
panel cluster will come on. Release the lever to
return to normal operation.

Windshield Wipers

The windshield wiper controls are located on the
multifunction lever. They are controlled by turning
z
the band with this
symbol.
The windshield wipers work in all ignition positions,
except off. This includes the Retained Access Power
mode. See Retained Accessory Power (RAP) on
page 3-18.
4-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Canyon - 2010

Table of Contents