License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding the
license plate lamp lens.
2. Pull the lens away from the lamp assembly.
3. Pull the old bulb straight out from the
bulb socket.
4. Install the new bulb.
5. Replace the lamp assembly lens and tighten
the screws.
Replacement Bulbs
Exterior Lamp
Back-up Lamps
Front Sidemarker Lamps
Front Turn Signal Lamps
License Plate Lamp
Halogen Headlamps
High-Beam
Low-Beam
Rear Turn Signal, Stoplamp,
and Taillamp
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
3157
194
3457
W5W
9005 HB3
9006 HB4
3057
435