Securing A Child Restraint Designed For The Latch System; Securing A Child Restraint In A Rear Outside Seat Position; Extended Cab And Crew Cab - GMC 2003 Sierra 1500 Pickup Owner's Manual

Securing a Child Restraint Designed
Securing a Child Restraint in a Rear
for the LATCH System
Outside Seat Position
1 .
2.
3.
4.
5.
Find the anchors for the seating position you want
Extended Cab and Crew Cab
to use, where the bottom of the seatback meets the
back of the seat cushion. There is limited space in the rear seating of an extended
Put the child restraint on the seat.
anchors in the vehicle. The child restraint there is enough room to secure your seat properly.
instructions will show you how.
cab model. If you want to secure a child restraint in a
rear outside seating position, be sure to study the
Attach the anchor points on the child restraint to the
instructions that came with your child restraint to see if
If the child restraint is forward-facing, attach the top
strap to the top strap anchor. See Top Strap on
page 1-42. Tighten the top strap according to
the child restraint instructions.
Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
If your child restraint is equipped with the LATCH
system, see Lower Anchorages and Top Tethers for
Children (LATCH System) on page 1-46.
1-49