Table of Contents
Advertisement
Speedometer and Odometer
Your speedometer lets you see your speed in both
miles per hour (mph) and kilometers per hour (km/h).
Your odometer shows how far your vehicle has
been driven, in either miles (used in the United States)
or kilometers (used in Canada).
Trip Odometer
The trip odometer can tell you how far your vehicle has
been driven since you last set the trip odometer to zero.
Press the reset button to toggle between the trip
odometer and the regular odometer. Holding the reset
button for two seconds while the trip odometer is
displayed will reset it.
To display the odometer reading with the ignition off,
press the reset button.
Engine Hour Meter Display
The odometer can also display the number of hours the
engine has run. To display the hour meter, turn the
ignition off, press and hold the reset button for at least
four seconds. The hour meter will be displayed for
up to 30 seconds, or until the ignition is turned on.
Tachometer
Notice:
On vehicles with a manual transmission, if
you operate the engine with the tachometer in the
shaded warning areas, your vehicle's engine or other
parts of your vehicle could be damaged. Damage to
your engine or vehicle caused by operating the
engine with the tachometer in the shaded warning
areas isn't covered by your vehicle warranty. Don't
operate the tachometer in the shaded warning areas.
Safety Belt Reminder Light
When the key is turned to RUN or START, a chime will
come on for several seconds to remind people to
fasten their safety belts, unless the driver's safety belt is
already buckled.
The safety belt light will
also come on and stay on
for several seconds, then
it
will flash for several more.
If the driver's belt is already buckled, neither the chime
nor the light will come on.
Your tachometer displays the engine speed in
revolutions per minute (rpm).
3-32
Advertisement
Table of Contents
