Service Manual
Removal:
1 - Remove arm top cover.
2 - Remove screw (A).
3 - Hold the bottom side of cover (B) and pull it out and up from machine.
Replacement:
1 - Replacement of this cover is the same as described above, but in a reverse order.
Removal:
1. Remove the bed bottom rubber feet (C).
1. Remove the screws (D) and the screw (E).
2. Remove hex nut (F).
3. Remove bed bottom cover (G).
Replacement:
Replacement of this bed bottom cover is the same as described above, but in a
1.
reverse order.
Rev. no.
MAR/05
Right Side Cover
Bed Bottom Cover
12
P/N 358426002