Outside Power Mirrors - Chevrolet 2008 Malibu Owner's Manual

To adjust for compass variance, do the following:
1. Find your current location and variance zone
number on the zone map that follows.
2. Press and hold the on/off button until a zone
number appears on the display.
3. Once the zone number appears on the display, press
the on/off button quickly until you reach the correct
zone number. If C appears in the compass window,
the compass may need calibration. See "Compass
Calibration" listed previously.

Outside Power Mirrors

Use the selector switch located above the four-way
control panel to choose either the left or right outside
mirror. Then press the control pad to move the selected
mirror in the desired direction.
To maximize the viewing area, adjust each mirror so
you can see the side of your vehicle and the area beside
and behind your vehicle.
The controls for the
outside power mirrors are
located on the inside of
the vehicle near the
driver's side mirror.
2-41