Table of Contents
Advertisement
Alternate Setup Method
Alternate Setup Method
1.5
Turn your cable or DSL modem on by reconnecting the power
supply to the modem.
To power adapter
Existing networking cable
(came with modem)
1.6
Before plugging the power cord into the Router, plug the cord
into the wall, then plug the cord into the Router's power jack.
1.7
Verify that your modem is connected to the Router by checking
the lights on the front of the Router. The green light labeled
"Modem" should be ON if your modem is connected correctly to
the Router.
1.8
Verify that your computer is connected properly to the Router
by checking the lights labeled "LAN 1,2,3,4". The light which
corresponds to the numbered port that you connected your
computer to should be ON if your computer is
connected properly.
Alternate Setup Method
See the section in this manual called "Manually Configuring Network
Settings" for directions (page 56).
Set your computer's network
Step 2
settings to work with a
DHCP server
16
16
Mac or PC
computer that
was originally
connected to the
cable or
DSL modem
Network cable
(to computer)
Advertisement
Table of Contents
