Table of Contents
Advertisement
Connecting and Configuring your Router
Step 4
Configure the Router
The Wizard will now transfer all of the configuration information to the
Router. This will take approximately one minute. During this time, do
not turn off the Router or computer. The Router will restart itself at
the end of this step.
Your Router is now connected to the Internet. Now you can begin
surfing the Internet by opening your browser and going to your
favorite web page.
Congratulations! You have finished installing your new Belkin Router.
You are ready to set up the other computers in your home. You can
also add computers to your Router any time you want. Simply follow
the "Alternate Setup Method" on the next page to learn how to add
more computers.
4.1 Checking the Internet
The Wizard will now check for
an Internet connection. This can
take a few minutes. The Wizard
may not detect a connection right
away. If not, it will retry a number
of times. The "Connected" light on
the front panel of the Router will
flash during this time.
4.2 Finished
When the Internet connection
is complete, the Wizard will tell
you that you are finished. The
"Connected" LED on the front of
the Router will be solid GREEN,
indicating that the Router is now
connected to the Internet.
14
Advertisement
Table of Contents
