MSI MS-6161 User Manual page 60

Atx lx11 mainboard

CHAPTER 3

Resume by Alarm

This function is for setting date and time for your computer to boot

up. During Disabled, you cannot use this function. During Enabled, choose

the Date and Time Alarm:

Date(of month) Alarm

Time(hh:mm:ss) Alarm

Note: If you have change the setting, you must let the system boot up until

it goes to the operating system, before this function will work.

Power Status LED

This item determines which status the Power LED will use. The

settings are Blink, Dual Color, and Single Color. During Blink, the power LED

will blink when the system enters the suspend mode. When the mode is in

Dual Color, the power LED will change its color during suspend mode.

Choose the Single Color and the power LED will always remain lit.

Wake Up On LAN

To use this function, you need a LAN add-on card which support

power on functions. It should also support the wake-up on LAN jumper

(JWOL1).

Enabled

Disabled

IRQ 8 Break Suspend

You can Enable or Disable monitoring of IRQ 8 so it does not

awaken the system from suspend mode.

You can choose which day of the month the

system will boot up. Set to 0, to boot every day.

You can choose what hour, minute and second

the system will boot up.

Wake up on LAN supported.

Wake up on LAN not supported.

3-23

AWARD

BIOS SETUP

AWARD

BIOS SETUP