MSI MS-6161 User Manual page 52

Atx lx11 mainboard

CHAPTER 3

EDO DRAM Write Burst

This sets the timing for burst mode writes from DRAM (EDO). Burst

read and write requests are generated by the CPU in four separate parts.

The lower the timing numbers, the faster the system will address memory.

x222

x333

DRAM Data Integrity Mode

Select Non-ECC or ECC(error-correcting code), according to the

type of installed DRAM. The settings are Non-ECC (default) or ECC.

CPU To PCI IDE Posting

Set this option to Enabled to enable posted messages from the CPU

to the PCI bus or IDE controller. The settings are Enabled or Disabled. The

Optimal and Fail-Safe default settings are Enabled.

System BIOS Cacheable

Select Enabled allows caching of the system BIOS ROM at F000h-

FFFFFh, resulting in better system performance. However, if any program

writes to this memory area, a system error may result.

Enabled

Disabled

Video BIOS Cacheable

Select Enabled allows caching of the system BIOS ROM at C0000h-

F7FFFh, resulting in better video performance. However, if any program

writes to this memory area, a system error may result.

Enabled

Disabled

Video RAM Cacheable

Select Enabled allows caching of the video RAM, resulting in better

system performance. However, if any program writes to this memory area, a

system error may result.

Write DRAM timings are 2-2-2-2

Write DRAM timings are 3-3-3-3

BIOS access cached

BIOS access not cached

Video BIOS access cached

Video BIOS access not cached

AWARD

3-15

BIOS SETUP