MSI MS-6161 User Manual page 54

Atx lx11 mainboard

CHAPTER 3

SDRAM RAS-to-CAS Delay

This item allows you to select SDRAM RAS-to-CAS Delay. The

settings are Fast or Slow.

SDRAM RAS Precharge Time

This item allows you to select SDRAM RAS Precharge Time. The

settings are Fast or Slow.

SDRAM CAS Latency Time

This item allow you to select the SDRAM Latency Time. The

settings are 2 or 3.

Auto Detect DIMM/PCI Clk

This item allows you to select theDIMM/PCI clock. The other

sockets will not generate when DIMM/PCI cards are not installed. The

setting should be set to enabled which works better for EMI.

Spread Spectrum

This item allows you to select the clock generator Spread Spectrum

function. The default is enabled.

CPU Host Clock

This item allows you to select the processor FSB (Front Side Bus).

You can choose from 66MHz, 68MHz, 75MHz, or 83MHz. The default

setting is 66 MHz.

75 and 83.3 MHz are used for overclocking purposes. We do not

NOTE:

guarantee that the Motherboard, CPU or other components will work

properly under these speed.

AWARD

3-17

BIOS SETUP