Table of Contents
Advertisement
Memory Installation Procedures
Installing DIMM Modules
You can install memory modules in any combination as follows:
Slot
Slot 1
(Bank 0 & Bank 1)
Slot 2
(Bank 2 & Bank 3)
Total System Memory
Memory Population Rules
1. Supports only SDRAM DIMM.
2. To operate properly, at least one 168-pin DIMM module must be installed.
3. This mainboard supports Table Free memory, so memory can be installed on
DIMM1 or DIMM 2 in any order.
4. Supports 3.3 volt DIMM.
1. The DIMM slot has 2 Notch Keys "VOLT and DRAM", so the
DIMM memory module can only fit in one direction.
Front View
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. The plastic clip at the side of the DIMM slot will automatically close.
Memory Module
8MB~128MB,
8MB~128MB,
DRAM
VOLT
2-5
Hardware Setup
Total Memory
8MB~256MB
8MB~256MB
8MB~512MB
Rear View
Advertisement
Table of Contents
