Chevrolet 2006 Tahoe Owner's Manual page 466

Hide thumbs Also See for 2006 Tahoe:

Table of Contents

Extended Models

B. Removable

Storage Tray

C. Retaining Hook

D. Retaining Bracket

and Wing Nut

E. Jack Tools

F. Mounting Bracket

G. Wing Nut Retaining

Wheel Blocks

H. Wheel Blocks

1. Return the jack tools (E), to the tool bag.

2. Assemble wheel blocks (H) and jack (I) together

with the wing nut (G) and retaining hook (C).

3. Position under the jack storage tray (B) in the left

rear side panel below the wheelbase and tighten,

adjusting clockwise until the jack is secured tight in

the mounting bracket. Be sure to position the

holes in the base of the jack onto the pin in the

mounting bracket.

4. Use the retaining clip to fasten the tool kit on the

stud in the storage compartment in the rear left

trim panel and turn the wing nut clockwise to

5. Return the storage tray (B) to its original location.

Chapters

Table of Contents

Suburban 2006