Back-Up Lamps; Replacement Bulbs - Chevrolet 2005 SSR Pickup Owner's Manual

Hide thumbs Also See for 2005 SSR Pickup:

Table of Contents

Back-Up Lamps

To replace a back-up lamp bulb, do the following:

1. Reach underneath the vehicle near the license plate

and ﬁnd the bulb socket.

2. Remove the socket from the lamp assembly by

locating and then squeezing the release tab

while turning the socket counterclockwise.

3. Turn the bulb counterclockwise and then pull

outward to remove it from the socket.

4. Insert a new bulb into the socket by lining up the

notches on the bulb and turn it clockwise to

5. Reverse the steps to reinstall the lamp assembly

on the vehicle.

Exterior Lamp

Back-up Lamps

Parking Lamps

Sidemarker Lamps

Turn Signal Lamps

For replacement bulbs not listed here, contact your

Show Quick Links

Table of Contents