Chevrolet 2004 Silverado 1500 Pickup Owner's Manual page 153

Outside Power Camper-Type Mirror
If your vehicle is equipped with outside power
camper-type mirrors, they can be adjusted so you can
have a clear view of objects behind you.
To extend the mirrors move the selector switch, located
above the mirror control, to the middle position. The
mirror control will illuminate. Press the left side of
the mirror control to slide the mirror heads away from
the body of the vehicle. Press the right side of the mirror
control to slide the mirror heads toward the body of
the vehicle.
Outside Power Foldaway Mirrors
Move the upper selector switch to the left or right to
choose the mirror you want to adjust; then press the dots
located on the four-way control pad to adjust the mirror.
If your vehicle is equipped
with this feature, the
controls are located on the
driver's door armrest.
The mirrors may also include a memory function which
works in conjunction with the memory seats. See
"Memory Seats" under Memory Seat on page 2-67 for
more information.
To fold or unfold the mirrors, move the selector switch,
located about the mirror control, to the middle
position. The mirror control will illuminate. Press the
right or left side of the mirror control to fold or unfold the
mirrors. You may notice the mirror glass adjust as the
mirrors fold in; this is normal. The mirror glass will
reposition itself once the mirrors are unfolded.
If the mirrors are accidentally folded/unfolded manually,
they may shake or flutter at normal driving speeds
and may not stay in the unfolded position. If this
happens, you will need to reset the mirrors. See
"Resetting the Power Foldaway Mirrors" next.
Resetting the Power Foldaway Mirrors
You will need to reset the power foldaway mirrors if the
following occurs:
•
They are accidentally manually folded/unfolded.
•
The mirrors will not stay in the unfolded position.
•
The mirrors shake and flutter at normal driving
speeds.
To reset the power foldaway mirrors, fold and unfold
then at least three times using the mirror controls. This
will reset them to their normal detent position.
2-61