Table of Contents
Advertisement
Replacing the Lithium Battery
The camera head uses a lithium battery (CR2032) to
retain date and time data.
When the lithium battery's voltage falls, the clock
indication dose not appear. Replace the lithium battery
and set the clock (see page 77).
1
Pull the upper part of the
battery cover (on the rear of
the camera head) forward and
turn the cover clockwise.
For detaching the VTR or camera
adaptor, see "Fitting a VTR" next
page.
2
Take out the lithium battery.
3
Reverse step 2 to insert a
replacement lithium battery.
Make sure that the + symbol
on the battery is facing you.
4
Close the battery cover.
Note
• Carefully read the instructions for replacing the
lithium battery. Lithium batteries may explode if
misused.
• Use only CR2032-type lithium batteries. Other types
of lithium batteries may come loose when the
camcorder is moved. If you have difficulty finding
CR2032-type lithium batteries, contact your Sony
dealer.
Rear of the
camera head
Press down and pull out toward you.
Chapter 2 Fitting and Connections
Battery cover
21
Advertisement
Table of Contents
