Table of Contents
Advertisement
Advanced menu page 5
PAGE 5(NEXTm$ PREVm4)
mSS IND:ALWAYS
LL IND:ON
MIC IND:ON
IRIS IND:ON
GAIN IND:ON
FILTER IND:ON
EXIT MENU (YESm4)
Item
SS IND
Selects the mode for
showing the shutter setting
when displaying the normal
indications.
LL IND
Selects whether or not to
show the LOW LIGHT
indication on the normal
indications when inadequate
lighting is detected.
MIC IND
Selects whether or not to
show the camera
microphone output
indication on the normal
indications.
IRIS IND
Selects whether or not to
show the lens's F-stop value
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
GAIN IND
Selects whether or not to
always show the gain
setting indication on the
normal indications.
FILTER IND
Selects whether or not to
always show the FILTER
knob setting indication on
the normal indications.
The FILTER knob setting
indicator is always displayed
when in EZ mode.
Settings
3SEC: Displays shutter
setting for three seconds only
when the setting has been
changed.
ALWAYS (normal value):
Displays the shutter setting at
all times.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value): Always
displays.
OFF: displays for two
seconds only when the
setting has been changed.
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
Advanced menu page 6
PAGE 6(NEXTm$ PREVm4)
mAUDIO IND:ON
TAPE IND:ON
TC IND:ON
ID IND:OFF
ID SET:µ
(
EXIT MENU (YESm4)
Item
AUDIO IND
Selects whether or not to
show the audio level
indication on the normal
indications (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
TAPE IND
Selects whether or not to
show the VTR's remaining
tape indication on the normal
indications. (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
TC IND
Selects whether or not to
show the time data indication
on the normal indications
(valid only when the DSR-1/
1P or PVV-3/3P is
connected).
ID IND
Selects whether or not to
display the camera ID when
displaying color bars.
ID SET
Sets the camera ID (up to
eight characters, including
alphanumerics, symbols,
and spaces).
Chapter 4 Viewfinder Screen Indications and Menus
)
Settings
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
ON (normal value):
Displays.
OFF: Not display.
See "To set the camera ID"
on next page.
59
Advertisement
Table of Contents
