Disassembly and Reassembly
3-30) Electric Box
Part Name
PBA Main
PBA Inverter
How To Do
1. Remove the 4 screw attached to
the upper left and right Case PCB
Panel with a phillips screwdriver(+).
2. Disengage all housing connectors
from the main PCB.
Before doing the above,
make sure that the unit is
CAUTION
unplugged.
3. Press the lower locking hook down
and remove the Main PBA by
pulling it out.
(Refer to the picture)
1. Remove the INVERTER PBA by
lifting the upper part of the hook up.
57
Descriptive Picture