Samsung RF23HT Series Service Manual page 48

Disassembly and Reassembly
Part Name
Ice Maker
How To Do
7. Remove the screw from the Duct
Tray-ice.
8. With a flat blade screwdriver, push
the duct to the right and remove it
from the locking tab. (Refer to the
image.)
9. With a flat blade screwdriver, pry
down on the refrigerant tube to
separate it from the bottom of the
ice maker. (Refer to the image.)
10. Push down the refrigerant pipe
slightly and separate the refrigerant
pipe and the Ice Maker Assembly
completely.
11. While pressing the Hook, pull out
the Ice Maker.
12. While pushing down the Duct-
Tray-Ice, pull out the Ice Maker
carefully and remove it.
※ When removing the ice maker,
be careful not to damage the
grommets on the tray or the
refrigerant tube. (Refer to the
dotted parts on the right side
photo.)
※ If the ice maker is frozen, it can
be melt by using the steam
heater.
48
Descriptive Picture