Operation Panel (Fr-Lu08-01) - Mitsubishi Electric 800 Series Instruction Manual

Operation panel (FR-LU08-01)

2.7
Operation panel (FR-LU08-01)
2.7.1
Components of the operation panel
The operation panel (FR-LU08-01) is an IP55 compatible model that can only be installed on the FR-A806-L2/L3 series.
(It cannot be installed on the standard model or the separated converter type of the FR-A800 series.)
(a)
(b)
(c)
(i)
(h)
(g)
Symbol Name
a Power lamp
b Alarm lamp
c Monitor
d FWD key, REV key
e STOP/RESET key
f Setting dial
g HAND/AUTO key
h MON key
i MENU key
j Software key (F1)
k Software key (F2)
l Software key (F3)
m Connector
n For manufacturer setting. Do not use. Do not peel off the waterproof seal affixed to the operation panel.
o Battery cover
p Rating plate
NOTE
• Do not operate the keys with sharp tools.
• Do not press the LCD part.
• Do not peel off the waterproof seal affixed to the operation panel. If the seal is peeled off, the operation panel does not
conform to IP55.
46
INSTALLATION AND WIRING
Front view
(m)
(j) (k) (l)
(d)
(e)
(f)
ON when the power is turned ON.
ON when an inverter alarm occurs.
Shows the frequency, parameter number, etc.
(Using Pr.52, Pr.774 to Pr.776, the monitor item can be changed.)
FWD key: Starts the forward operation.
REV key: Starts the reverse operation.
Stop operation commands.
Reset the inverter when the protective function is activated.
Used to change the frequency and parameter settings.
Shows the details of the fault when the dial is pressed in the fault history mode.
Switches the operation mode between HAND (PU), HANDJOG (PUJOG), and AUTO (External).
Displays the first priority monitor. (For the details, refer to the Instruction Manual of the FR-LU08(-01).)
Displays the Quick menu.
Displays the Function menu when the key is pressed while the Quick menu is displayed.
Select an operation displayed on the monitor.
Connector to the inverter. Connect this connector to the PU connector of the inverter.
Remove the battery cover when replacing the backup battery for the real time clock function.
(For the details, refer to the Instruction Manual of the FR-LU08(-01).)
-
Rear view
(n)
Description
(p)
(o)