Brake System Warning Light - Chevrolet 2003 Corvette Owner's Manual

Hide thumbs Also See for 2003 Corvette:
Table of Contents

Advertisement

Brake System Warning Light
Your vehicle's hydraulic brake system is divided into two
parts. If one part isn't working, the other part can still
work and stop you. For good braking, though, you need
both parts working well.
This light should come on
when you turn the ignition
key to START. If it
doesn't come on then,
have it fixed so it will be
ready to warn you if there's
a problem.
If this warning light stays on after you start the engine,
the parking brake may still be set or there could be
a brake problem. Refer to Parking Brake on page 2-30
to see if it is set. If the parking brake is not set, have
your brake system inspected right away.
If the light comes on while you are driving and you have
a LOW BRAKE FLUID message showing on the DIC,
pull off the road and stop carefully. You may notice that
the pedal is harder to push. Or, the pedal may go
closer to the floor. It may take longer to stop. If the light
is still on, have the vehicle towed for service. See
Towing Your Vehicle
on
page 4-33.
'-
-ur brake -]stem may not be working
properly if the brake system warning light is
on. Driving with the brake system warning light
on can lead to an accident. If the light is stiii
on after you've pulled off the road and stopped
carefully, have the vehicle towed for service.
3-35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents