Chevrolet 2002 Venture Owner's Manual page 16

Lift up either lever and slide the seat forward or
rearward. Release the lever. Push and pull on the seat to
make sure it is locked into place.
1-10
The other lever is located on
the rear of the seat.
Removing the Split Bench Seat
Make sure the seatback is in the upright position.
1. For the second row split bench, with the seatback in
the upright position, unhook the side attachment for
the safety belt. This mini
right side of the seat.
3. Lift the seatback recliner lever or pull the nylon strap
on the back of the seat to fold the seatback forward.
4. Slide the seat all the way back by lifting one of the
adjustment levers and sliding the seat fully rearward.
-
buckle is located on the
2. Push the red center of the
buckle up with a small
--
pointed object like a
--
key or a pen to
remove the seat belt,
if needed.