Turn And Lane Change Signals - Chevrolet 2002 Camaro Owner's Manual

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D
-
Turn and Lane Change Signals
D
-
Headlamp High/Low
D
Windshield Wipers
D
Windshield Washer
D
Cruise Control (Option)
2-52
Beam Changer

Turn and Lane Change Signals

The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay on as you signal a turn or lane change,
a signal bulb may be burned out and other drivers won't
see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuse (see "Fuses and Circuit
Breakers" in the Index).
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.