Headlamp High/Low Beam Changer - Chevrolet 2000 Tahoe Owner's Manual

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
fuse (see "Fuses and Circuit Breakers" in the Index).
Turn Signal On Chime
If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal lever
to the off position.

Headlamp High/Low Beam Changer

To change the headlamps from low to high beam or high
to low beam, pull the multifunction lever all the way
toward you. Then release it.
-
out bulbs and a blown
When the high beams
are on, this light on the
instrument panel also
will be on.
Flash-To-Pass Feature
This feature allows you to use your high
headlamps to signal a driver in front of you that you
want to pass. It works even if your headlamps are off.
To use it, pull the turn signal lever toward you, but not
so far that you hear it click.
If your headlamps are off or on low
-
high beam headlamps will turn on. They'll stay on
as long as you hold the lever toward you and the
-
high beam indicator on the instrument panel will
come on. Release the lever to turn the high
headlamps off.
-
beam
-
beam, your
-
beam
2-37