Table of Contents
Advertisement
- I -
+
I1
If you have P24950ZR16 Goodyear Eagle GS-C tires
or P275/40ZR17 Goodyear Eagle F1 -GS tires, they
must roll in a certain direction for the best overall
performance. The direction is shown by an arrow on
the sidewall. Because these tires are directional, they
should be rotated as shown here. These tires should
only be moved from front to rear and rear to front on
the same side of the vehicle.
Don't include the compact spare tire in your tire rotation.
After the tires have been rotated, adjust the front and
rear inflation pressures as shown
on
the Tire-Loading
Information label. Make certain that all wheel nuts
are properly tightened. See "Wheel Nut Torque" in
the Index.
Rust or dirt on a wheel, or on the parts to which
it is fastened, can make wheel nuts become loose
after a time. The wheel could come off and cause
an accident. When you change a wheel, remove
any
rust or dirt from places where the wheel
attaches to the vehicle. In an emergency, you can
use
a
cloth or a paper towel to do this; but be
sure to use a scraper or wire brush later, if you
need to, to get all the rust or dirt off. (See
"Changing a Flat Tire" in the Index.)
Advertisement
Table of Contents
