Canon MP610 Service Manual page 37

3) Setting of the left margin correction value ("+" means to increase the left margin)
Press the Stop/Reset button the specified number of time(s) according to the correction value listed in the table below, then press
the ON/OFF button.
Number of times
the Stop/Reset
button is pressed
(N)
Return to the parameter mode selection for left margin
0 times
correction
1 time +1 pitch
2 times +2 pitches
3 times +3 pitches
4 times -1 pitch
5 times -2 pitches
6 times -3 pitches
Return to the service mode menu selection (no writing
7 times or more
to the EEPROM)
After the value is set, the machine returns to the parameter mode selection. Repeat steps 2) and 3) to adjust the left margin in each
parameter mode: "back side of paper fed from the rear tray," "front side of paper fed from the cassette," and "back side of paper fed
from the cassette."
4) After the left margin correction in all the parameter modes is completed, press the Stop/Reset button 4 times or more in the
parameter mode selection, then press the ON/OFF button to return to the service mode menu selection.
Left margin correction value
35 / 43