Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon MP610 Service Manual

MP610

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement
Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
initialization
Destination
settings (EEPROM
settings)
Ink absorber
counter resetting
(EEPROM
settings)
Ink absorber
counter value
setting
(EEPROM
settings)
Ink absorber
replacement
Paper feed motor
position adjustment
CD / DVD
detection sensor
light volume
*1
correction
Automatic print
head alignment
Manual print head
alignment
Grease application - At carriage unit replacement
Ink system
function check
LCD language
settings
Timing
- At logic board replacement
- At logic board replacement
- At logic board replacement
- At ink absorber replacement
- At logic board replacement
- When the ink absorber
becomes full
- At paper feed motor
replacement
- At carriage unit replacement
- At logic board replacement
- At print head replacement
- At logic board replacement
- When print quality is not
satisfying
- At print head replacement
- At logic board replacement
- When print quality is not
satisfying
- At lift cam replacement
- To gears
- At Easy-Scroll Wheel
replacement
- At logic board replacement
- At spur base replacement
- At carriage unit replacement
- At logic board replacement
Purpose
To initialize settings
To set destination.
To reset the ink absorber
counter.
To set the ink amount data in the
ink absorber to the ink absorber
counter.
To replace the ink absorber with
a new one.
To adjust the belt tension.
(Position the paper feed motor
so that the belt is stretched
tight.)
To correct the light volume for
the CD / DVD detection sensor.
To secure the dot placement
accuracy.
To secure the dot placement
accuracy.
To maintain sliding properties of
the following items:
- Carriage shaft
- Lift cam bushing
- Machine sliding portions
(gears)
- Wheel base
To maintain detection
functionality for presence of the
ink tanks and each ink tank
position.
To set the language to be
displayed on the LCD.
1 / 43
TABLE OF CONTENTS
Tool
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the service
mode.
Screwdriver, a pair of 15 min.
tweezers, etc.
None. 5 min.
None. 5 min.
Perform in the service
mode.
None. 10 min.
Perform in the user (Use MP-
mode. 101.)
None. 13 min.
Perform in the user
mode.
FLOIL KG-107A 1 min.
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the user
Approx.
time