Canon MP610 Service Manual page 10

This layout is available only for A4 or
8.5"x11"(215x279).
Cannot specify "stickers" and "half-
side layout" together. Check markings
on handwriting sheet.
Change the setting after removing the
card.
The card is currently write-enabled.
Set to read-only mode before
performing operation.
The paper size is not correct. Check
the page size you have set.
Failed to scan Photo Index Sheet.
Check orientation and position, and
make sure platen and sheet are clean.
<See manual>
Failed to scan handwriting sheet.
Check orientation and position, and
make sure platen and sheet are clean.
<See manual>
Failed to scan DVD/CD handwriting
sheet.
Check orientation and position, and
make sure platen and sheet are clean.
Failed to scan Photo Index Sheet.
Check for missed and improper
markings.
Failed to scan handwriting sheet.
Check for missed and improper
markings.
Failed to scan DVD/CD handwriting
sheet. Check for missed and improper
markings.
Failed to scan. Either document
cannot be scanned or is not placed on
the platen glass.
Cover is open. Close cover.
Scanner is not operating correctly.
In Layout print, "Mixed 1, 2, or 3" which is
available only with A4 or Letter size paper is
selected, but the paper size is not set to A4
or Letter.
The selected layout on the handwriting sheet
is not supported for Stickers.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
With the memory card set to the Read/write
mode, Card Direct printing operation was
attempted from the menu.
Non-supported size of paper for Camera
Direct printing via PictBridge connection is
selected.
The machine failed in scanning the Photo
Index Sheet.
The machine failed in scanning the
handwritten Photo Index Sheet.
The machine failed in scanning the
handwritten DVD / CD sheet.
The machine scanned the Photo Index Sheet,
but markings in the sheet were incorrect.
The machine scanned the handwritten Photo
Index Sheet, but markings in the sheet were
incorrect.
The machine scanned the DVD/CD
handwritten sheet, but markings in the sheet
was incorrect.
The machine failed in scanning the
document for Fit-to-page copy.
The cover was opened during printing.
The CIS cannot detect the home position, or
the scanner unit warming-up is not
performed properly at power-on.
8 / 43
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Press the OK button to
clear the error. The LCD returns to the
display before the error occurrence.
A temporary error. Remove the memory
card, then change the Read/Write attribute.
A temporary error. Remove the memory
card, change the memory card setting to
Read-only, then perform Card Direct
printing.
Cancel printing on the digital camera.
Confirm the paper size, and print again.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index
Sheet.
- Place the sheet in the correct orientation
and position.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index
Sheet properly.
- Place the sheet in the correct orientation
and position.
Press the OK button to clear the error.
Correct the settings, then try the operation
again.
Close the cover. The LCD returns to the
display before the error occurrence.
Press the OK button to clear the error, and
turn the machine off and on again. If the
error still occurs, repair servicing is required.