Icom ID-52A Basic Manual page 52

10
MAINTENANCE
■ Troubleshooting
L "AM" indicates the PDF type Advanced Manual.
PROBLEM
Transmitting is
impossible.
A Program Scan does
not start.
A Memory Scan does
not start.
A distorted noise
is heard when the
earphone is used.
Charging is impossible
at power ON.
* This operation may generate certain spurious signals, the S-meter appears, or noise may be
heard.
39
POSSIBLE CAUSE
The transmit power level is
set to S-Low, Low1, Low2,
or Mid.
The PTT Lock function is
activated.
The Busy Lockout function
is activated.
The transmit frequency is
out of the amateur radio
band.
The VFO mode is not
selected.
The same frequencies are
entered into the scan edges.
The Memory mode is not
selected.
Only one or no memory
channel is entered.
The earphone mode is OFF. Turn ON the earphone mode
"Charging (Power ON)" is
set to "OFF."
SOLUTION
Set the transmit power level
to High.
Turn OFF the PTT Lock
function on the MENU
screen.
Turn OFF the Busy Lockout
function on the MENU
screen.
Set the transmit frequency
within the amateur radio
band.
Push [VFO/MHz] to select
the VFO mode.
Enter different frequencies
into the scan edges.
Push [MR] to select the
Memory mode.
Enter two or more memory
channels.
on the MENU screen.
Set "Charging (Power ON)"
to "ON" (default) on the
MENU screen.*
REF.
p. 20
p. 73
p. 73
p. 19
p. 14
AM
p. 14
p. 23
p. 74
p. 73