Table of Contents
Advertisement
.
1 "
. .
2. Get up to the speed you want.
3.
Push in the set button at the end of the
4. Take your foot off the accelerator
lever and release it.
pedal.
I - \
W
To Resume a Set Speed
Suppose you set your Cruise Control at a
desired speed and then you apply the
brake or clutch pedal. This, of course,
shuts off the Cruise Control. But you
don't need to reset it. Once you're going
about 25 mph (40
km/h)
or more, you c a ~
move the Cruise Control switch to
"WA" (Resume/Accelerate) for about ha1
a second.
You'll go right back up to your chosen
speed and stay there.
To Increase Speed While Using Cruise
Control
There are two ways to go to a higher
speed. Here's the first:
1. Use the accelerator pedal to get to the
higher speed.
2. Push the button at the end of the lever,
then release the button and the
accelerator pedal. You'll
now
cruise at
the higher speed.
Here's the second way to go to a higher
speed:
1. Move the Cruise switch to W A . "
Hold it there until you get up to the
speed you want, and then release the
switch.
To increase your speed in very small
amounts, move the switch to "WA"
for less than half a second and then
release it. Each time you do this, your
vehicle will go about one mph
(1.6
km/h)
faster.
To Reduce Speed While Using Cruise
Control
There are two ways to reduce your speed
while using cruise control:
1.
2.
Push in the button at the end of the
lever until you reach the lower speed
you want, then release it.
To slow down in very small amounts,
push the button for less than half a
second. Each time you do this, you'll
go one mph (1.6 km/h) slower.
65.
.
Advertisement
Table of Contents
