Off Mode - Ricoh MT-C4 Manual

Off mode is used only if no printer/scanner or fax unit is
installed.
The machine enters off mode when one of the following is
done.
The auto off timer runs out after the last job.
The operation switch is pressed to turn the power off.
When the machine enters auto off mode, no power is
supplied to the printing engine, and almost none to the
controller.
The machine recovers to the ready condition if the
operation switch is pressed.
Recovery time
MT-C4a/b: Max 30 seconds
MT-C4d: Max 60 seconds
MT-C4e: Max 300 seconds
Slide 78
No additional notes
Energy Saver Modes

Off Mode

» The auto off timer is controlled by User Tools: Timer settings.
78
MT-C4 Training