Energy Saver Modes - Ricoh MT-C4 Manual

Energy Saver Modes

This machine has three types of energy saver modes:
Panel off mode
Low power mode
Off/Sleep mode
» Off mode: It is used only if no printer/scanner and/or fax unit is
installed.
» Sleep mode: It is used instead of off mode when a printer/scanner or
fax unit is installed.
Slide 72
When the machine is not being used, the machine enters energy saver mode
to reduce the power consumption by turning off the LCD of the operation
panel and lowering the fusing temperature.
The area shaded grey in this diagram represents the amount of energy that
is saved when the timers are at the default settings. If the timers are
changed, then the energy saved will be different. For example, if the timers
are all set to 240 minutes, the grey area will disappear, and no energy is
saved before 240 minutes expires.
Overview - 1
72
MT-C4 Training