Cadillac 2003 CTS Owner's Manual page 200

To customize the name using the Base audio system, do
the following:
1. Select the PERSONALIZATION NAME menu item
by pressing the TUNE/SEL knob once.
You will see a cursor on the screen.
2. Turn the TUNE/SEL knob until you reach the first
letter you want to highlight it. There is a complete
alphabet with both upper and lower case letters and
the numbers zero through nine. Also included are
-
spaces and other non letter characters such as the
ampersand (&).
3. Press the TUNE/SEL knob once to select the letter.
The letter will then appear on the display.
If you make a mistake, press the Back key. This will
exit the menu. You can then go back into the menu
and edit the name. You can also press the TUNE/SEL
knob repeatedly to cycle through all the characters
until you reach the character you wish to change.
4. Repeat Steps 2 and 3 until the name you want is
complete. You can program up to 16 characters.
5. Press the BACK button located to the lower right of
the display to exit and set your choice or let the
screen time out and return to the main screen.
2-132
To customize the name using the Navigation system, do
the following:
-
1. Press the multi function button located to the right of
the display that is next to the EDIT prompt.
This will open the EDIT menu. You will see an alphabet
at the bottom of the display and a blank line with a
blinking cursor. Also included here are spaces and other
-
non letter characters such as the ampersand (&).
2. Scroll to the first letter you want to highlight it.
3. Press the TUNE/SEL knob once to select the letter.
The letter will then appear on the line above the alphabet.
4. Repeat Steps 2 and 3 until the name you want is
complete. You can program up to 26 characters.
If you make a mistake, press the multi
button located to the right of the display that is next
to the Delete prompt. This will delete the last letter
you typed so you can input a different letter.
-
5. Press the multi function button located to the right of
the display that is next to the Back prompt to exit
and set your choice.
The name you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
-
function