Advertisement
DEFROSTER
Press this button to remove
fog
or
frost from the
windshield.
This setting sends most of the airflow to the winds
amount to the floor outlets.
,hield with only a small
6 (
The fan speed will work automatically to maintain your requested interior
temperature. If you need more air directed to your windshield, you should
select a higher fan
speed.
f4
In some cold start conditions, the AUTO blower fan speed may be limited
until the engine cooling system warms up. This is normal to prevent
windshield fogging.
a
It will help if you first clear any ice and
snow
from the hood and the air
inlet (it's between the hood and the windshield).
E A R DEFOGGER
n
Press this button to
@
defogger.
turn on the rear
With it, your rear window and both outside rearview mirrors are heated,
The system will automatically shut off after 10 minutes. If further
defogging is desired, simply press the button again.
NOTICE:
Scraping the inside of your rear window could cut and damage
the heating grids. Your warranty would not cover this damage.
And don't put decals there; you might have to scrape them off.
1
I
13
a
a
c1
Advertisement
