夾紙排解 LEAR APER / 自動雙面送稿裝置 1.1 D UPLEX UTOMATIC OCUMENT EEDER 向上拉起自動送稿裝置左蓋把手,將左蓋 1. Open the document feeder left cover until it stops. 完全打開。 2. If the orginal is not caught in the entry 若原稿並未卡在送稿裝置的入口,將原稿 of the document feeder, pull out the 抽出。...
5/ 紙盤 1 及紙盤 5 1.2 T 1. 移除紙盤 5 上面的紙張。 1. Remove any paper from the Tray 5. 2. 把紙盤 5 從機身拉出。 2. Pull Tray 5 out of the main unit. 3. Pull Tray 1 out of the main unit. 3.
/ 熔著部組件 1.3 F USING 1. 提起後蓋拉桿,拉開後蓋。 1. Lift the rear door release and pull open the door. 2. 打開定影組件的綠色把手。 2. Open the green tab of the fusing unit. 3. 取出任何卡住的紙張。 3. Remove any jammed paper. Page 4 of 6...
更換碳粉匣 EPLACING ONER 先確定裝置已經停止運作,然後開啟前 1. Make sure that the device is not operating, and open the front door. 蓋。 2. Pull out the toner cartridge slowly. 慢慢拉出碳粉卡匣。 3. Shake the new toner cartridge gently. 輕輕搖晃新碳粉卡匣。 4. Hold the cartridge with the arrow facing up, and insert the cartridge slowly.
更換碳粉回收匣 EPLACING ASTE ONER ONTAINER 先確定裝置已經停止運作,然後開啟右 1. Make sure that the device is not operating, and open the right door. 蓋。 2. Take out the waste toner container from the device. 把碳粉回收匣從裝置中取出。 3. Put the new waste toner container into the device properly.
Page 8
2513-2513 This document includes Fuji Xerox product(s), licensed from Xerox Corporation. The distributor of the product(s) is FUJIFILM Business Innovation Corp. Xerox, Xerox and Design, as well as Fuji Xerox and Design are registered trademarks or trademarks of Xerox Corporation in Japan and/or other countries.