Nintendo TWL-001 Operation Manual page 41

Internet
Connecting using the Nintendo Wi-Fi USB Connector
By connecting the Nintendo Wi-Fi USB Connector to a USB port of a PC with
a broadband internet connection, you can use the PC as an access point.
Note: Before performing the following settings, install the Nintendo Wi-Fi USB Connector
Registration Tool on the computer and ready it for use. Refer to the Nintendo Wi-Fi USB
Connector Operations Manual for details.
Broadband
Internet Line
DSL Modem, etc.
How to Connect
1 Touch CONNECTION SETTINGS.
2 Touch NINTENDO Wi-Fi USB
CONNECTOR.
3 Confirm that the Nintendo Wi-Fi USB
Connector is ready for use and touch NEXT.
80
(sold separately)
PC + Nintendo Wi-Fi Nintendo DSi
USB Connector system
4 Proceed to the following PC steps once this
screen is displayed.
PC Steps
5 Click on the icon in the notification area
of the taskbar.
The Registration Tool is displayed.
6 Select the user name you want to connect
from the displayed user names on the
Nintendo DSi system .
1
Select PERMIT CONNECTION from
the displayed menu .
2
Note: The screens shown are from
Windows XP.
7
Touch OK to perform a connection test.
If the connection test is successful, setup is complete
Note: If connection fails, refer to the list of error codes in the Support and Troubleshooting
Page 108 ➜
section .
Notification area
Registration Tool Screen
1
2
Select the user name you
want to connect
81