Dic Operation And Displays - Buick 2005 Terraza Owner's Manual

DIC Operation and Displays

The DIC has different modes which can be accessed by
pressing the DIC buttons located on the center of the
instrument panel. The buttons are the information,
set/reset, and menu buttons.
The button functions are detailed in the following pages.
DIC Buttons
Q4R
(Information): Press this button to display the
odometer, trip distance, time elapsed, average speed,
fuel economy, battery voltage, and oil life.
r
(Set/Reset): Press this button to set or reset
certain functions and to turn off or acknowledge
messages on the DIC.
3-46
q
(Menu): Press this button to display the units,
language, personalization, if equipped, compass zone
and compass calibration, if equipped. See DIC Vehicle
Personalization (Uplevel Only) on page 3-68 for more
information.
Information Button Items
Q4R
(Information): Press this button to scroll
through the following items:
Odometer
Press the information button until the odometer displays.
This mode shows the distance the vehicle has been
driven in either miles or kilometers.
Trip A and Trip B
Press the information button until A or B displays. This
mode shows the current distance traveled in either miles
or kilometers since the last reset for each trip odometer.
Both trip odometers can be used at the same time.
Each trip odometer can be reset to zero separately by
pressing the set/reset button while the desired trip
odometer is displayed.
The display will show the odometer on the top line and
the trip odometer information, either A or B, on the
bottom line.