Driver Information Center (Dic); Dic Operation And Displays - Buick 2008 Allure Owner's Manual

2008 allure
Table of Contents

Advertisement

Driver Information Center (DIC)

Your vehicle may have a Driver Information Center (DIC).
All messages will appear in the DIC display located in
the instrument panel cluster, below the speedometer.
The DIC buttons are located on the center of the
instrument panel, below the center outlets.
The DIC comes on when the ignition is on. After a short
delay, the uplevel DIC will display the WELCOME
DRIVER (1 or 2) if a personalized key 1 or 2 is used,
and then the information that was last displayed before
the engine was turned off.
The base level DIC displays the odometer and trip
odometers only.
The uplevel DIC displays the odometer, trip odometers,
fuel economy, trip computer, vehicle system, and
compass display information. It also displays warning
messages if a system problem is detected. In addition,
the uplevel DIC displays phone numbers that are
®
called using the OnStar
®
See OnStar
System on page 2-41.
The outside air temperature automatically appears in the
bottom right corner of the uplevel DIC display when
viewing the trip/odometer screens, fuel screens and
3-48
system, if equipped.
some of the gages screens. If the outside air temperature
is at or below 37°F (3°C), the temperature reading will
toggle between displaying the outside temperature and
the word ICE for two minutes. If there is a problem with
the system that controls the temperature display, the
letters OC (open circuit) or SC (short circuit) will appear
on the display. If this occurs, have the vehicle serviced by
your dealer/retailer.
The uplevel DIC also allows some features to be
customized or personalized. See DIC Vehicle
Personalization on page 3-73 for more information.

DIC Operation and Displays

The DIC has different modes which can be accessed by
pressing the DIC buttons located on the center of the
instrument panel. Depending on whether your vehicle
has the base level or uplevel DIC, the buttons and
modes available will differ.
The base level buttons are the trip/odometer and
English/Metric buttons.
The uplevel buttons are the trip/odometer, fuel, gages,
set/reset, and option buttons.
The button functions are detailed in the following pages.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents