Remove The Cabinet Mount Metals; Remove The C2-Board; Remove The C3-Board; Remove The C1-Board - Panasonic TH-P50V20A Service Manual

8.14. Remove the Cabinet mount
metals
1. Remove the One leg bracket. (See section 8.13.)
2. Remove the Cabinet mount metals fastening screws (×10
, ×20
) and remove the Cabinet mount metal top
and the Cabinet mount metal bottom.

8.15. Remove the C1-Board

1. Remove the Cabinet mount metal bottom (See section
8.14.).
2. Remove the flexible cable holder fastening screws (×5
).
3. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
4. Disconnect the flexible cable (C10).
5. Remove the screws (×4 ) and remove the C1-Board.

8.16. Remove the C2-Board

1. Remove the Hanger metal R and the One leg bracket.
(See section 8.13.)
2. Remove the Cabinet mount metal bottom (See section
8.14.).
3. Remove the flexible cable holder fastening screws (×5
).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20, C21 and C26).
6. Remove the screws (×4

8.17. Remove the C3-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the One leg bracket.
(See section 8.13.)
3. Remove the Cabinet mount metal bottom (See section
8.14.).
4. Remove the flexible cable holder fastening screws (×8
).
5. Disconnect the flexible cables (CB9, CB10, CB11, CB12,
CB13, CB14 and CB15).
6. Disconnect the flexible cables (C31 and C36).
7. Disconnect the connectors (C33 and C35).
8. Remove the screws (×5
25
) and remove the C2-Board.
) and remove the C3-Board.