Remove The Chassis Support Metals And The M8 Nut Metals; Remove The Contact Metal Bottom B; Remove The Plasma Panel Section From The Cabinet Assy - Panasonic TX-P42GW30 Service Manual

8.15. Remove the Chassis support
metals and the M8 nut metals
1. Remove the Stand bracket. (See section 8.12.)
2. Remove the screws (×3
sis support metal (L, R) and the M8 nut metal top (L, R).
3. Remove the screw (×1
metal bottom (L, R).
8.16. Remove the Contact metal bot-
tom B
1. Remove the Stand bracket. (See section 8.12.)
2. Remove the screws (×5

3. Remove the Contact metal bottom B.

each) and remove the Chas-
each) and remove the M8 nut
, ×7
).
8.17. Remove the Plasma panel sec-
tion from the Cabinet assy
1. Place the Cabinet assy on a flat surface of a table (cov-
ered by a soft cloth) and a cushion.
2. Remove the Contact metal bottom B. (See section 8.16.)
3. Remove the screws (×6

4. Remove the Plasma panel section from the Cabinet assy.

25
).