Remove The Cabinet Mount Metals; Remove The C1-Board; Remove The C2-Board; Remove The Plasma Panel Section From The Cabinet Assy - Panasonic TC-P46G25 Service Manual

8.14. Remove the Cabinet mount
metals
1. Remove the One leg bracket. (See section 8.13.)
2. Remove the Cabinet mount metals fastening screws (×7
, ×14
) and remove the cabinet mount metal top
and the Cabinet mount metal bottom.

8.15. Remove the C1-Board

1. Remove the Hanger metal R and the One leg bracket.
(See section 8.13.)
2. Remove the Cabinet mount metal bottom (See section
8.14.).
3. Remove the flexible cable holder fastening screws (×12
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×5

8.16. Remove the C2-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the One leg bracket.
(See section 8.13.)
3. Remove the Cabinet mount metal bottom. (See section
8.14.)
4. Remove the flexible cable holder fastening screws (×10
).
5. Disconnect the flexible cables (CB9, CB10, CB11, CB12,
CB13, CB14 and CB15).
6. Disconnect the flexible cables (C20 and C21).
7. Disconnect the connectors (C23 and C25).
8. Remove the screws (×4
) and remove the C1-Board.
) and remove the C2-Board.
8.17. Remove the Plasma panel sec-
tion from the Cabinet assy
1. Remove the cabinet mount metals fastening screws (×7
).
2. Remove the plasma panel fastening screws (×3
) and remove the cabinet assy.
3. For leaving the cabinet assy from the plasma panel, pull
the bottom of the cabinet assy forward, lift, and remove.
25
, ×8